User Manual

+
T
Point Operation 54
---------------------------------------------------------------
4.2 Free and fixed modes
---------------------------------------------------------------
Point operations offers two display modes.
Free Mode: After a point has been selected, Point Operation is in Free
mode: Only the main parameters are displayed.
The parameter list can be extended by a maximum of 13
parameters with [GOTO].
Fixed mode: Switchover to the Fixed mode is carried out as follows:
- Actuate [Forward] or [Backward]
- [GOTO] "Parameter Group"
- [PAR] within the TRR display
A switchback to the Free mode is only possible after the
point has been reselected.
In the Fixed mode one page of successive parameters is
displayed. It is not possible to group parameters together
at will.
4.3 Operation
---------------------------------------------------------------
4.3.1 Pushbuttons
[GOTO] - Appending a particular parameter (only in Free mode)
or
- Switching to a parameter group.
- Switching to a page of successive parameters.
[GOTO]
➡ Entry window
8522OC1E
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995