User Manual

Insight in Brief 18
---------------------------------------------------------------
2.6 Login and logout
---------------------------------------------------------------
2.6.1 Login
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"UNIGYR-VISONIK Insight" window
: :
Select "Command"
: :
Select "Login"
: :
➡ "Login" pop-up window
: :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
8522O20E
Fill in the two input fields "User Code" and "Password" (the
password typed-in characters are not visible), then
[OK]
Do not press <Enter> after typing in the user code. This
would complete the entry and the unentered password
would be interpreted as " ".
The changeover from "User Code" to "Password" must
therefore be made with <Tab>.
After successful login the name of the user appears in the
title bar of the window.
The contents could also be:
"Invalid Password"
"Invalid User Code"
"No Connection with DCS"
Before proceeding further, each of these messages must
be confirmed with [OK].
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995