User Manual

Insight in Brief 16
---------------------------------------------------------------
Mark the desired computer, then
[OK]
A message window gives information about the current
status of the connection setup.
As soon as there is connection with the DCS, the date and
the time indications in the title bar of the window change
from red to green. At the same time, the name of the
announced user is displayed.
In the case of a modem connection:
If you do not log in within one minute, the DCS breaks the
connection again.
Exiting from and starting "Insight":
Direct connection: If a direct connection existed when the exit was made, it
will be set up again automatically at startup.
Modem connection: If a modem connection existed or if a modem had been
initialized when exit was made, the associated modem will
be initialized again automatically, in both cases, at startup.
The original modem connection, however, will not be set
up automatically.
2.5.3 Breaking a connection
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"UNIGYR-VISONIK Insight" window
: :
Select "Communication"
: :
Select "Cancel"
: :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Caution in case of a modem connection:
If you are not going to work with "Insight" for a long period
of time, (but without leaving the program), it is advisable to
break a modem connection or else the telephone bill will
be unnecessarily taxed (up to the time that the max. con-
nection time has elapsed).
The associated modem will remain initialized, that is, it will
be capable of accepting incoming calls.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995