User Manual

Appendix:
Communication Configuration 249
---------------------------------------------------------------
Coupling Modem
Baud rate As desired, e.g. 2400; if necessary, this value is taken
over automatically into the "Modemsequence" field.
DSEQ All modem-specific
data required for starting up a connec-
tion must be entered here.
You can find more details on this under the DSEQ param-
eter description in the DCS operation manual, and in the
following document:
"Phone Software Documentation" dated 22nd October,
1992.
[OK]
A modem initialising now takes place.
Modem configuration: The modem being used should be configured as follows:
- Command Echo: enabled
- Modem Result Code: enabled (type "words")
- DCD: On only with carrier present
- DTR: Modem should disconnect if it detects an on-to-
off transition on DTR
- DSR: on
- Xon/Xoff: Disabled
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
Partner configuration/
: :
"UNIGYR-VISONIK Insight" window
modification:
: :
Select "Communication"
: :
Select "Connect"
: :
➡ "VISONIK Connection Startup" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995