User Manual

Insight in Brief 15
---------------------------------------------------------------
2.5 Communication
---------------------------------------------------------------
The following describes how you can set up or break direct
or modem connections with DCS.
In case of problems with the communication, the definition
of additional connection configurations or the modification
of existing connection configurations, please refer to the
"Communication Configuration" chapter.
2.5.1 Communication status
8522OL5E
To find out the status of the communication, open the
relevant icon. A detailed description of the information
contained therein is also given in the "Communication
Configuration" chapter.
2.5.2 Setting up a connection
A connection with a DCS is set up as follows:
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"UNIGYR-VISONIK Insight" window
: :
Select "Communication"
: :
Select "Connect"
: :
➡ "VISONIK Communication Setup" window
: :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
8522OL2E
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995