User Manual

Appendix:
Communication Configuration 247
---------------------------------------------------------------
Name Enter any name, e.g. "Documentation Center"
Tel. No. Leave empty
SS No. Decimal SS number (in-house system number) as defined
in SYS,PROJ, e.g.:
"0" for System 0
"130" for System 2 202 (octal)
If you have to operate with "Insight" in a system network, a
"SYS.INI" file with entries relating to the connected
computer must be available. You will find further
information in the "Read me" file.
Port Port used, e.g. COM2
Max. operation These entries are not required in the case of direct con-
timeout/Max. timeout nection - leave empty.
for data
DSEQ Leave empty.
[OK]
[OK] causes a return to the last window. From there, the
newly defined or modified connection can be established
with another [OK].
In this window, it is also possible to define a computer
which was not to be connected at the beginning. For this,
"NULL" must be marked for the "Port."
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995