User Manual

Appendix:
Installation 230
---------------------------------------------------------------
"Install" dialogue Answer in the affirmative to the "Update CONFOG.SYS "
window: option, but not to the "Overwrite files" option.
Following confirmation of this window, the installation
program independently executes all needed tasks. You
will, however, be occasionally requested to change the
diskette.
- Setup of the program directory and the necessary sub-
directories
- Copying all files to the correct directories.
- Setup of the "UNIGYR-VISONIK" group.
- Setup of "UNIGYR-VISONIK Insight" program object in
the above group.
- Carrying out the following adaptations in the
"CONFIG.SYS" file.
LIBPATH=.;.\DLL;C:\PATHWORKS\BIN;C:\...
DEVICE=F:\UINSIGHT4\OS2SNTNL.SYS
(in accordance with the path defined above)
Booting OS/2: After successful installation, OS/2 must be booted again.
14.2 Configuration Data Take Over
---------------------------------------------------------------
Starting with Insight version 4.33, the configuration data
has been stored in the UVI.PRF file. The file was
previously named VISONIK.PRF.
Configuration data take over from VISONIK versions
up to and including V4.2:
- Before newly installing, make a backup copy of
VISONIK.PRF.
- Copy this file to the Insight program directory.
- Start the takeover program in an OS/2 window:
...\UVI\TAKEOVER.EXE visonik.prf uvi.prf 420 460
Configuration data take over from VISONIK versions
from V4.33:
- Before newly installing, make a backup copy of
UVI.PRF.
- Copy this file to the Insight program directory.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995