User Manual

Appendix:
Installation 229
---------------------------------------------------------------
14.1.4 Installing Insight
Insight is installed with the "SW installer." The installation
is essentially self-explanatory; help can be requested in
each dialogue window.
Be sure to observe the information in the README file in
diskette 1.
Proceed as follows:
Insert the "UNIGYR-VISONIK Insight" No. 1 disk into the
appropriate drive, then:
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
Open OS/2 workplace shell "System"
: :
Open "Command Line"
: :
Start "OS/2 Screen"
: :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Before starting the installation program, change to the
drive containing the diskette.
Enter the following after the system prompt appears:
"x:"
<Enter>
"install" <Enter>
x: stands for the startup drive (a: or b:), in which the
"UNIGYR-VISONIK Insight" disk is inserted.
In the first phase of the installation procedure, the program
requests some information:
"Install directories" - Write the desired installation path into the "Executable
dialogue window: directory" entry field.
e.g., E:\INS460
- Using <TAB>, change to the "DLL directory."
As a result, the entry needed for the above example
occurs automatically:
E:\INS460\DLL
Do not change this proposal.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995