User Manual

+
Picture Editor 213
---------------------------------------------------------------
11.8.8 Changing symbols
(For point parameters)
COS, ACT: - Act'mode: Point
- Point address and point parameter.
- Act'mode: Symbol
- Colour and flashing mode for the different ranges (for
bitset parameters and parameters with continuous val-
ues, there is only one range).
- Txtlnth: >0 if the accompanying text defined in the di-
alogue must (also) be updated.
Symbol library: <M> ("Multiselect" function)
At the desired symbols (with the exception of the
last) in the correct sequence
At the last symbol
Picture Editor: - Insert the Multi-Symbol.
- Connect up with the updating channel.
The symbols take on the foreground colour and also the
flashing attribute from the DCS.
This updating mode also functions with rotated or flipped
symbols. However, it does not function with symbols which
have been changed in size.
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995