User Manual

+
Picture Editor 212
---------------------------------------------------------------
Picture Editor: - Draw the bar or marker (see later in this chapter).
- Connect up with the updating channel.
The bar and the marker take over the flashing attribute
from the DCS. Colour is taken on as follows:
Bar: The updated part of the bar takes on the
colour.
Marker: The straight line and the foreground of the
marker take on the colour.
11.8.7 Colour
(For pool variables or point parameters.)
COS, ACT: - Act.Type: CB pool or point
- Point address and point parameter or pool variable
number.
- Act.Type: Colour
- Colour and flashing mode for the different ranges (for
pool variables, parameters with continuous values, and
bitset parameters, there is only one range).
- Txtlnth: >0 if the accompanying text defined in the di-
alogue must (also) be updated.
Picture Editor: - Draw the graphic figure or insert the symbol.
- Connect up with the updating channel.
The graphic figures take on the background colour and the
flashing attribute from the DCS. Symbols and texts take on
the foreground colour.
Colour change also functions with symbols which have
been changed in size, flipped or rotated.
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995