User Manual

+
Picture Editor 210
---------------------------------------------------------------
11.8.3 Updating supplementary texts
In the VISONIK COS, ACT dialogue, texts can be defined
at various places, and be available, irrespective of the se-
lected updating mode:
- Extended parameter information.
- PST
- "Parameter Name"
- "Parameter Long Name"
- Language-dependent supplementary text
COS, ACT: - Act.Type: "Point"
- Txtlnth: >0 (corresponds to the text definition)
- Act.Form: "Colour," "Bar," "Symbol."
Picture Editor: These texts appear, left justified, below the updated
graphic figure in the "T1" font. As such, no more actions
need to be taken in the Picture Editor.
If the updating mode "Text Only" is chosen, procedures to
be followed in the Picture Editor are the same as those
described under "Language-dependent Text" or "Operator
Name."
11.8.4 Language-dependent Text/Operator Name
COS, ACT: - Act.Type: "Text" or "OperName"
- Txtlnth: >0 (corresponds to the chosen text)
- Text catalogue, possibly Text Number
- Foreground colour, flashing mode
Picture Editor: - Enter short text or only <Space> with the desired font
size and background colour.
- Connect with the updating channel.
The updated text is appended to the (static) text entered in
the Editor. The updated text and the static text take over in
the Picture window the attributes defined in the COS dia-
logue for the drawing colour and the flashing mode.
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995