User Manual

+
Picture Editor 209
---------------------------------------------------------------
11.8.2 Assigning channel numbers
Mark the graphic figure concerned, then
Icon: "Bar" (Keyboard <I>)
➡ "Update" window
8522O84E
Entering a channel number, e.g.
"14"
[OK]
If the graphic figure concerned is already connected with
an updating channel, its number is displayed in the input
field "Channel Number."
Otherwise, the lowest free number is proposed.
Several graphic figures can be updated with a single
channel, e.g.:
The updating channel to a positioning command is used
simultaneously for updating two bars.
Maximum number of There are 70 updating channels (No. 1 to 70) available per
channels: picture. You can determine the actual number in the COS,
ACT dialogue ("Channel Number" question).
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995