User Manual

+
Picture Editor 207
---------------------------------------------------------------
11.7.13 Loading the library
This function loads the current symbol library from the lo-
cal hard disk (files LIB1.PTF to LIB5.PTF in the ...\UVI\LIB
directory) and thereby revokes all changes which have
been made.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Picture Editor" window
: :
Click on the "Heating Register" icon (<S>)
: :
Select "Symbols"
: :
Select "Load Library"
: :
➡ Safeguard prompt: : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
"Are you sure?"
Attention:
If [OK] is actuated, all the changes which had been made
in the symbol library will be lost.
11.7.14 Saving the library
This function saves the currently active library to the local
hard disk (files LIB1.PTF to LIB5.PTF in the ...\UVI\LIB di-
rectory).
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Picture Editor" window
: :
Select "Symbol"
: :
Select "Save Library"
: :
Safeguard prompt: : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
"Are you sure?"
It is possible that pictures which already exist (even those
on other "Insight" stations) will access the symbols in a li-
brary.
As such, the changing and subsequent saving of libraries
should basically be carried out only when a new library
(library Nos. 4 and 5) is being set up.
The changed library files must then be distributed on
diskettes or via networks to all "Insight" stations.
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995