User Manual

+
Picture Editor 204
---------------------------------------------------------------
11.7.8 Using a symbol
(= Inserting a symbol into the edited drawing)
Desired symbol
➡ Automatic change in the Picture Editor
➡ Marking box
Position the marking box
The directional keys can be used for fine positioning
It is possible to carry out the following operations with a
symbol which has been added to the Picture Editor:
Enlarging/shrinking, compression/expansion, moving,
mirror-imaging and rotation.
On the other hand, its line width and colour can no longer
be changed.
If this is desired, the connection to the symbol library must
be broken (see below).
11.7.9 Multi-symbol
This function is required for the updating mode "Symbol
Change."
<M>
Desired symbols in the correct order
Last symbol
➡ Automatic change in the Picture Editor
➡ Marking box
Position the marking box
The directional keys can be used for fine positioning
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995