User Manual

+
Picture Editor 183
---------------------------------------------------------------
If the line width of a marked figure cannot be changed, the
figure in question must be a symbol or be part of a
grouped figure.
To change the line width of a symbol, break its connection
to the symbol library. Details are given under "Symbols."
The line widths of combined figures can only be changed
when the figures are separated (broken apart) again.
"Maximum Line Width" influences the "Text" operation:
With this setting, texts T1 to T4 are written in bold script.
11.5.9 Colour selection
The basic colours for the foreground (lines, texts) and the
background (filling colours, text background) appear for
checking purposes in the "sample box" above the "Line
Width" icons.
The active foreground colour is indicated in the colour
palette additionally by a thin rectangle.
The X indicates the "transparent" "colour."
8522O65
Selecting the colours - Mark the graphic figure
of already - Choose the colour (see below)
drawn figures:
Selecting the colours (The colours can be selected before or after the next
of figures figures are chosen.)
to be drawn:
First remove any existing markings:
"in thin air" (i.e. away from all graphic figures)
Then select the colour (see the following)
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995