User Manual

+
Picture Editor 182
---------------------------------------------------------------
11.5.7 Superimposing
Superimposition involves the following actions:
Place the figure(s) in the foreground (<F>) or the back-
ground (<B>).
Mark the figure(s)
Icon: "2 overlapping rectangles"
(Keyboard: <F> <B>)
The left icon places to the front, the right one to the rear.
11.5.8 Line width selection
The "sample box" above the "line width" icons shows the
current line width in red.
Adjusting the line - Mark the figure(s)
width to already - Select the line width (see below)
drawn figures:
Selecting the line width for the next figures to be
drawn:
(The selection can be made before or after the next figure
has been chosen)
At first remove any existing markings:
"in thin air"
then select the line width (see below)
Choice of line width: Icon: "Desired line width"
The line width icon changes in colour from black to red,
the new line width is indicated at the "sample box," and the
line widths on any marked figures are changed appropri-
ately.
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995