User Manual

+
Picture Editor 181
---------------------------------------------------------------
11.5.4 Marking all figures
To mark all the drawn figures together, proceed as follows:
Icon: "Hand" (Keyboard: <H>)
➡ The last drawn graphic figure is marked.
<A>
➡ All graphic figures are now framed together within a
single marking box with 8 handles (four in the corners
and four on the middle of the sides).
In addition, each separate figure is framed by a dotted-
line rectangle (without handles).
11.5.5 Combining figures
Co-marked graphic figures lose their common marking as
soon as another figure is marked or drawn. Should the
marked figures have to be united permanently with a sin-
gle new figure, they must be combined.
However, it will not be possible to change the line width or
the colour on the new figure.
Mark the desired graphic figures together (see under
"Marking")
Icon: "2 facing arrows"
(Keyboard: <G>)
11.5.6 Breaking apart
A combined figure can be broken apart at any time into the
original individual figures:
Mark the combined figure
Icon: "2 opposing arrows"
(Keyboard: <U>)
To remove the common marking:
"in thin air"
---------------------------------------------------------------
CM2B8523E UNIGYR-VISONIK Insight March 1995