User Manual

Picture Editor 175

---------------------------------------------------------------

11.4.10 Bar

In the display, a bar is used for the graphical

representation of updated analogue values

(measurements, positioning commants, etc.).

As such, bars must always be connected to an updating

channel. (See under "Updating").

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

: :

"Picture Editor" window

: :

<9> or

: :

Select "Draw"

: :

Select "Bar"

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

Starting corner

Diagonally opposite corner

The directional keys can be used for fine positioning

at the second corner

The selected foreground colour occupies the lower or the

left third of the bar drawn in the Picture Editor.

In the picture layout, the colour defined in the COS, ACT

dialogue represents the updated proportion of this part.

Background colour

Foreground colour

(is updated)

8521Z11E

If the updated part should appear in the upper or right

hand part, the drawn bar can be rotated 90˚ (see under"

Object operations").

---------------------------------------------------------------

CM2B8523E UNIGYR-VISONIK Insight March 1995