User Manual

+
Picture Editor 165
---------------------------------------------------------------
11.3.3 Saving pictures to the DCS
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Picture Editor" window
: :
Select "Command"
: :
Select "Save to DCS"
: :
➡ "Save picture" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
8522O92E
Enter the picture number:
"25"
Enter the system if the picture does not have to be saved
to its own system:
"MAN"
[OK]
Important note:
An ISC picture which had been changed and saved back
to the DCS, can no longer be displayed on the Colour
Operating Stations (COS).
If a picture is saved to any number of the DCS which had
never been loaded, "Insight" has no backup copy of the
original picture.
The picture in question is lost.
Changes to a currently displayed picture (on your or
another Insight) become active only following a new
callup.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995