User Manual

+
Picture Editor 164
---------------------------------------------------------------
When a picture is loaded from the DCS, "Insight" imme-
diately makes a backup copy. The file name contains the
system prompt as well as the picture number.
MAN 35.PTF
Directory: ...\UVI\PTF
The old DCS picture is therefore always locally available.
If the picture being worked on had been changed since the
last save operation, the following safeguard prompt is dis-
played immediately after the function "Load from DCS"
has been selected:
"Changes will not be saved!"
11.3.2 Loading the locally saved picture
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Picture Editor" window
: :
Select "Command"
: :
Select "Load from File"
: :
➡ "Load Picture from File" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Enter drive, directory and file or filename, [OK]
The directory and the filename are displayed next to the
window title:
"...\UVI\PTF\Anlage17.PTF"
The default is ...\UVI\PTF\*.PTF
When the function "Load Picture from File" is started, at
first only files with the extension .PTF are shown. A double
click the drive causes files with other extensions to be
shown also.
If the picture being worked on had been changed since the
last save operation, the following safeguard prompt is dis-
played immediately after the function "Load Locally" has
been selected:
"Changes will not be saved!"
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995