User Manual

Alarm Operation 148

---------------------------------------------------------------

9.4 Acknowledgments

---------------------------------------------------------------

Acknowledging In the "Alarm Operation" window:

only one alarm:

at the line to be acknowledged

➡ Prompt:

"Do you really wish to acknowledge E1'H8'Z04?"

Acknowledging When several alarms must be acknowledged, you can

several alarms: make a selection according to priority, time span or by

marking.

Marking alarms: Mark the alarms to be acknowledged:

Press the <Shift> key while clicking at additional lines.

If the click is repeated at the same line (with pressed

<Shift>), the mark is removed again.

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

: :

"Alarm Operation" window

: :

Select "Command"

: :

Select "Acknowledge"

: :

➡ "Acknowledge Alarms" window

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

8522OJ2E

Making a selection: Now select one of the six possibilities on the left hand side

of the window "Acknowledge Alarms"...

... if desired, enter new time limits...

... and mark "Confirm."

---------------------------------------------------------------

CM2B8523E UNIGYR VISONIK Insight March 1995