User Manual

A
Alarm Operation 147
---------------------------------------------------------------
Priority n: At least one of the four message priorities must be
marked.
Address: Here an address or an address range must be entered.
The VISONIK deputy signs (* and %) are also accepted.
[Default]: Insight notes the last-used option (confirmed with [OK])
and uses it as the default if there is new callup.
[Default] switches back again to this option after any
changes are made.
When the "Select" window is closed with [OK], the alarm
list is updated.
9.3 Sorting
---------------------------------------------------------------
Here, the sequence of the alarm points in the "Alarm
Operation" window is defined.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Alarm Operation" window
: :
Select "Command"
: :
Select "Sort"
: :
➡ "Sort Alarms" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
8522OJ1E
When the alarm operation is started, the points are sorted
according to "Date/Time."
If the sort sequence is changed to "Address" or "Priority,"
"Date/Time" acts as the second sort key.
[Default]: Insight notes the last-used sort (confirmed with [OK]) and
uses it as the default if there is new callup.
[Default] switches back again to this sort after any
changes are made.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995