User Manual

Data Processing 135
---------------------------------------------------------------
The output to the printer is not influenced by the change in
the setup; the scale lengths always correspond to the defi-
nition in the DCS.
Positioning <F7>
the legends: Selects one of four options:
"Off" No legends
"Right" Legends to the right of the graph.
"Below" Legends below the graph.
"Button" For each curve, a pushbutton appears
below the graph. When this is clicked, the
appropriate legend is displayed.
The option "Button" is not available for output to the
printer. Instead, the legends are printed below the graph.
If the X-axis exceeds 150mm, the legends are printed be-
low the graph (even if the option "Right" is selected).
8.4 Saving graphs
---------------------------------------------------------------
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Data Processing" window
: :
Select "Command"
: :
Select "Save"
: :
➡ "Save File" superimpose window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Select drive, directory and file or enter filename, [OK]
The default is ...\UVI\DP_USR\*.*
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995