User Manual

Trend Plot 125

---------------------------------------------------------------

The changes made under "Display" are valid only for the

momentary display. Should the new settings also be effec-

tive for a later call up, the Trend Set in question must be

filed locally.

The display period mentioned above determines the time

span of the display, but not the buffer size of the plotted

channels. These are changed under "Point Settings."

7.8.2 Point setup

The following is a description of how you can change the

channel definitions and enter in new channels.

To make changes in the setting of channel n, proceed as

follows:

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

Method a:

: :

"Trend Plot" window

: :

Select "Settings"

: :

Choose "Select Channel"

: :

Select "Channel n"

: :

➡ "Point Setup" window

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

8522OK1E

Method b: at pushbutton for channel n

➡ Window "Point Setup"

---------------------------------------------------------------

CM2B8523E UNIGYR VISONIK Insight March 1995