User Manual

12345
678910
11
Calendar 102
---------------------------------------------------------------
With the Calendar function, the Special Day Catalogue of
the DCS can be edited and distributed for the substations.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"UNIGYR-VISONIK Insight" window
: :
Select "Function"
: :
Select "Calendar"
: :
➡ "Calendar" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Icon:
8522O46E
The maximum number of windows for the "Calendar"
function is 2.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Calendar" window
: :
<F3> or
: :
Select "Command"
: :
Select "Exit" : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
If changes had been made in the calendar concerned
since the last save, the following safety message appears:
"Changes will not be saved"
In order to define calendars for the substations and to
save them in the DCS, a file must be defined (FILE pa-
rameter in the SS point) in the DCS for the substation in
question.
In addition, it must be decided to which group of Special
Day the substation should belong (SDCL parameter in the
SS point).
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995