User Manual

Timeswitch Catalogue 91
---------------------------------------------------------------
Any combination - Mark the first cell pair or the first cell area as described
of cell pairs: above.
- Press <Shift> and mark other cell pairs or cell areas
as described above.
Removing the Press <Shift>
marking from and proceed exactly as for marking.
individual cell pairs: The colour(s) of the cell(s) involved become white again.
5.8.5 PRV1: Change defaults
Only one default value can be used for each
destination (for WDC and OVC).
You can change these as follows:
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"OVC/EXE: DST..." window
: :
Select "Entry"
: :
Select "Default Value"
: :
➡ "Enter default value" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
The following entries are permitted:
- One numerical value
- DFV
- PDFV
- ADFV
- RDFV
- ZDFV
- VDFV
- . ("Don't care")
Further details are given in the "Operation Handbook
PRV1"
5.8.6 PRV1: Entering times and values
You cannot make new entries in the "Time" layout; you
can only edit existing entries.
There are two possibilities available for editing cell pairs:
- Enter times (Start and Stop) and values. This option is
especially necessary when entering new cell pairs.
- Change the time only.
The times and values option does not function if more than
one cell pair is simultaneously selected for the same day.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995