User Manual

CM2N8524E / 01.1999 Siemens Building Technologies
4/12 Landis & Staefa Division
The "Timeswitch Catalogue" function allows you to change the Weekday catalogues
(WDC) and Exception Catalogues (EXC) for BPS or Overrrich Catalogues (OVC) for
PRV1 of any point parameters in the process stations as well as to create new
catalogues. After the catalogues for the desired process stations have been loaded,
overview windows appear on screen:
For the highlighted destination, this window shows all available entries in the catalogues
and the defined Special Days in the form of bar diagrams. The time interval displayed
can be moved and zoomed as desired.
Actuating the appropriate buttons will open the windows with the input tables for the
catalogues and the graphic display of the Special Day calendar for the associated
process station.
WDC, EXC, and OVC table in the entry mode display:
WDC, EXC, and OVC table in the time mode display:
WDC, EXC, and OVC entries can be edited in these tables, whereby editing a single
cell pair or several cell pairs together is possible. For example: cancelling a column (i.e.
all entries for a day) or making the same new entry for a whole line (i.e. for all
weekdays).
The following editing actions are possible:
•
Making new entries or changing the values and possibly also the start and stop times
of existing entries
•
Changing the start and stop times of existing entries
•
Cancelling and copying entries
Thanks to the optimised loading and saving function, even large catalogues or
destinations can be loaded or saved very quickly.
Timeswitch
Catalogue