Description Siemens MS/TP Point Pickup Module Description The Siemens Point Pickup Modules (PPM) are expansion I/O devices that communicate on a BACnet master-slave/token-passing (MS/TP) network, allowing for the incorporation of a cluster of remote points into the Building Automation Station over the MS/TP network. The PPM family leverages the MS/TP network to extend the reach of any BTL-listed BACnet Building Controllers application program.
1 Features Features l l l l l l l l l l l l Wide range of signal type support for flexible IO solutions. Device ID and Device name auto-populated for efficient start up (Device ID and Device name are also writable for customization). UL and cUL Listed as Enclosed Energy Management Equipment. No additional enclosure required. Evaluated and certified by UL1) as suitable for installation in plenum areas. (Building codes for plenum requirements vary by location; check with local building authority).
Hardware Hardware Controller Board The controller interfaces with, but does not provide, direct control of the following external devices: l Digital input devices (dry contacts from motion sensors, alarm and door contacts) or Accumulator (gas, water, electrical) l Digital output devices (fans, pumps, lighting) l Analog input devices (temp, humidity, flow, pressure) l Analog output (valves, actuators) PPM Type Digital PPM I/O Function Description Analog PPM Combo PPM PPM2U3322.BPF and PPM2U3322.
MS/TP Point Pickup Modules Specifications MS/TP Point Pickup Modules Specifications Power Requirements Operating Range Power Consumption Input power range of 19.2 Vac to 28.8 Vac (50 or 60 Hz) 4 VA to 7 VA Universal Inputs 6 Point Digital PPMs (PPM-1U32.BPR and PPM-1U32.BPF) 1- 10K Ω Type II NTC Thermistor or dry contact 6 Point Analog PPMs (PPM-2U22.BPF and PPM-2U22.BPR) 2- 1000 Nickel RTD, 1000 Pt RTD, 0-10V, or dry contact 12 Point Combination PPMs (PPM-2U3322.BPF and PPM2U3322.
Ordering Information Ordering Information Part Number Description PPM-1U32.BPF 6 Point Digital BACnet MS/TP Point Pickup Module, Fixed terminal blocks (1UI 3DI 2DO) PPM-1U32.BPR 6 Point Digital BACnet MS/TP Point Pickup Module, Removable terminal blocks and HOA switches (1UI 3DI 2DO) PPM-2U22.BPF 6 Point Analog BACnet MS/TP Point Pickup Module, Fixed terminal blocks (2UI 2AI 2 AO) PPM-2U22.BPR 6 Point Analog BACnet MS/TP Point Pickup Module, Removable terminal blocks (2UI 2AI 2 AO) PPM-2U3322.
BACnet Protocol Implementation Conformance Statement BACnet Protocol Implementation Conformance Statement Products Product Model Number Protocol Revision Firmware Version Software Version 6 Point Analog PPM PPM-2U22.BPF PPM-2U22.BPR 135-2004 3.0 1.0 6 Point Digital PPM PPM-1U32.BPF PPM-1U32.BPR 135-2004 3.0 1.0 12 Point Combo PPM PPM-2U3322.BPF PPM-2U3322.BPR PPM-3U63.BPR (for China only) 135-2004 3.0 1.0 Vendor Information Siemens Industry, Inc.
BACnet Protocol Implementation Conformance Statement Supported BACnet Interoperability Building Block (BIBBs) BACnet Interoperability Building Blocks (BIBB) Supported Data Sharing DS-RP-A Data Sharing-ReadProperty-A DS-RP-B Data Sharing-ReadProperty-B DS-RPM-A Data Sharing-ReadPropertyMultiple-A DS-RPM-B Data Sharing-ReadPropertyMultiple-B DS-RPC-A Data Sharing-ReadPropertyConditional-A DS-RPC-B Data Sharing-ReadPropertyConditional-B DS-WP-A Data Sharing-WriteProperty-A DS-WP-B Data Sharin
BACnet Protocol Implementation Conformance Statement BACnet Interoperability Building Blocks (BIBB) Supported T-VMT-I-B Trending-Viewing and Modifying Trends-Internal-B T-VMT-E-B Trending-Viewing and Modifying Trends-External-B T-ATR-A Trending-Automated Trend Retrieval-A T-ATR-B Trending-Automated Trend Retrieval-B Network Management NM-CE-A Network Management-Connection Establishment-A NM-CE-B Network Management-Connection Establishment-B NM-RC-A Network Management-Router Configuration-A
BACnet Protocol Implementation Conformance Statement BACnet Standard Application Services Support Name ReadProperty Execute ReadPropertyMultiple Execute WriteProperty Execute UnconfirmedCOVNotification Initiate DeviceCommunicationContro Execute I-Am Initiate I-Have Initiate Who-Has Execute Who-Is Execute Data Link Layer Options BACnet IP, (Annex J) BACnet IP, (Annex J), Foreign Device ISO 8802-3, Ethernet (Clause 7) ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ANSI/ATA 878.
BACnet Protocol Implementation Conformance Statement Networking Options Router, Clause 6 – List all routing configurations, e.g., ARCNET-Ethernet, EthernetMS/TP, etc. BACnet/IP (Annex J) to BACnet MS/TP Annex H.3, BACnet Tunneling Router over UDP/IP BACnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Character Sets Supported Indicating support for multiple character sets does not imply that they can all be supported simultaneously. • ANSI X3.
BACnet Protocol Implementation Conformance Statement 6 Point Analog PPM Standard Object Types Supported Object Type Supported Creatable Accumulator Deletable No No Analog Input • No No Analog Output • No No Analog Value No No Averaging No No Binary Input • No No Binary Output • No No Binary Value No No Calendar No No Command No No No No Event Enrollment No No File No No Group No No Life Safety Point No No Life Safety Zone No No Loop No No Multi-stat
BACnet Protocol Implementation Conformance Statement Analog Input Object Type Analog Input Object Type Property_Identifier Supported Object_Identifier Yes Object_Name Yes Object_Type Yes Present_Value Yes Description No Device_Type No Status_Flags Yes Event_State Yes Reliability Yes Out_Of_Service Yes Update_Interval No Units Yes Min_Pres_Value No Max_Pres_Value No Resolution No COV_Increment Yes Time_Delay No Notification Class No High_Limit No Low_Limit No Deadba
BACnet Protocol Implementation Conformance Statement Status_Flags Yes Event_State Yes Reliability Yes Out_Of_Service Yes Units Yes Min_Pres_Value No Max_Pres_Value No Resolution Yes Priority_Array Yes Relinquish_default Yes W COV_Increment Yes W Time_Delay No Notification Class No High_Limit No Low_Limit No Deadband No Limit_Enable No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No Analog Value Object Type This object ty
BACnet Protocol Implementation Conformance Statement Reliability Yes Out_Of_Service Yes Polarity Yes Inactive_Text Yes Active_Text Yes Change_Of_State_Time No Change_Of_State_Count No Time_Of_State_Count_Reset No Elapsed_Active_Time No Time_Of_Active_Time_Reset No Time_Delay No Notification Class No Alarm_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W Binary Output Object Type Property_Identifier Supported Object_Id
BACnet Protocol Implementation Conformance Statement Priority_Array Yes Relinquish_default Yes Time_Delay No Notification Class No Feedback_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W Binary Value Object Type This object type will not be supported in this project. Calendar Object Type This object type will not be supported in this project. Command Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement Segementation_Support Yes Max_Segments_Support No VT_Classes_Supported No Active_VT_Sessions No Local_Time No Local_Date No UTC_Offset No Daylight_Savings_Status No APDU_Segment_Timeout No APDU_Timeout Yes Number_Of_APDU_Retries Yes List_Of_Session_Keys No Time_Sync_Recipients No Max_Master Yes W Max_Info_Frames Yes W Device_Address_Binding Yes Database_Revsion Yes Configuration_Files No Last_Restore_Time No Backup
BACnet Protocol Implementation Conformance Statement Loop Object Type This object type will not be supported in this project. Multistate Input Object Type This object type will not be supported in this project. Multistate Output Object Type This object type will not be supported in this project. Multistate Value Object Type This object type will not be supported in this project. Notification Class Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement 6 Point Digital PPM Standard Object Types Supported Object Type Supported Creatable Deletable Accumulator • No No Analog Input • No No Analog Output No No Analog Value No No Averaging No No Binary Input • No No Binary Output • No No Binary Value No No Calendar No No Command No No No No Event Enrollment No No File No No Group No No Life Safety Point No No Life Safety Zone No No Loop No No Multi-sta
BACnet Protocol Implementation Conformance Statement Description No Device_Type No Status_Flags Yes Event_State Yes Reliability Yes Out_Of_Service Yes W Scale Yes W Units Yes W Prescale No Max_Pres_Value Yes Value_Change_Time Yes Value_Before_Change Yes Value_Set Yes Logging_Record No Logging_Object No Pulse_Rate No High_Limit No Low_Limit No Limit_Monitoring_Interval No Notification Class No Time_Delay No Limit_Enable No Event_Enable No Acked_Transitions N
BACnet Protocol Implementation Conformance Statement Out_Of_Service Yes Update_Interval No Units Yes Min_Pres_Value No Max_Pres_Value No Resolution No COV_Increment Yes Time_Delay No Notification Class No High_Limit No Low_Limit No Deadband No Limit_Enable No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W W W Analog Output Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement Out_Of_Service Yes Polarity Yes Inactive_Text Yes Active_Text No Max_Pres_Value Yes Change_Of_State_Time No Change_Of_State_Count No Time_Of_State_Count_Reset No Elapsed_Active_Time No Time_Of_Actve_Time_Reset No Time_Delay No Notification Class No Alarm_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W W Binary Output Object Type Property_Identifier Supported Object
BACnet Protocol Implementation Conformance Statement Minimum_On_Time No Priority_Array Yes Relinquish_default Yes Time_Delay No Notification Class No Feedback_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W Binary Value Object Type This object type will not be supported in this project. Calendar Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement Max_APDU_Length_Accepted Yes Segmentation_Supported Yes Max_Segments_Supported No VT_Classes_Sessions No Local_Time No Local_Date No UTC_Offset No Daylight_Savings_Status No APDU_Segment_Timeout No APDU_Timeout Yes Number_Of_APDU_Retries Yes List_Of_Session_Keys No Time_Sync_Recipients No Max_Master Yes W Max_Info_Frames Yes W Device_Address_Binding Yes Database_Revision Yes Configuration_Files No Last_Restore_Time
BACnet Protocol Implementation Conformance Statement Multistate Output Object Type This object type will not be supported in this project. Multistate Value Object Type This object type will not be supported in this project. Notification Class Object Type This object type will not be supported in this project. Program Object Type This object type will not be supported in this project. Pulse Converter Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement 12 Point Combo PPM Standard Object Types Supported Object Type Supported Creatable Accumulator Deletable No No Analog Input • No No Analog Output • No No Analog Value No No Averaging No No Binary Input • No No Binary Output • No No Binary Value No No Calendar No No Command No No No No Event Enrollment No No File No No Group No No Life Safety Point No No Life Safety Zone No No Loop No No Multi-stat
BACnet Protocol Implementation Conformance Statement Analog Input Object Type Analog Input Object Type Property_Identifier Supported Object_Identifier Yes Object_Name Yes Object_Type Yes Present_Value Yes Description No Device_Type No Status_Flags Yes Event_State Yes Reliability Yes Out_Of_Service Yes Update_Interval No Units Yes Min_Pres_Value No Max_Pres_Value No Resolution No COV_Increment Yes Time_Delay No Notification Class No High_Limit No Low_Limit No Deadba
BACnet Protocol Implementation Conformance Statement Status_Flags Yes Event_State Yes Reliability Yes Out_Of_Service Yes Units Yes Min_Pres_Value No Max_Pres_Value No Resolution No Priority_Array Yes Relinquish_default Yes W COV_Increment Yes W Time_Delay No Notification Class No High_Limit No Low_Limit No Deadband No Limit_Enable No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No Analog Value Object Type This object typ
BACnet Protocol Implementation Conformance Statement Reliability Yes Out_Of_Service Yes Polarity Yes Inactive_Text Yes Active_Text Yes Change_Of_State_Time No Change_Of_State_Count No Time_Of_State_Count_Reset No Elapsed_Active_Time No Time_Of_Active_Time_Reset No Time_Delay No Notification Class No Alarm_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W Binary Output Object Type Property_Identifier Supported Object_Id
BACnet Protocol Implementation Conformance Statement Minimum_On_Time No Priority_Array Yes Relinquish_default Yes Time_Delay No Notification Class No Feedback_Value No Event_Enable No Acked_Transitions No Notify_Type No Event_Time_Stamps No Profile_Name No W Binary Value Object Type This object type will not be supported in this project. Calendar Object Type This object type will not be supported in this project.
BACnet Protocol Implementation Conformance Statement Max_APPDU_Length_Accepted Yes Segmentation_Supported Yes Max_Segments_Supported No VT_Classes_Supported No Active_VT_Sessions No Local_Time No Local_Date No UT_Offset No Daylight_Savings_Status No APDU_Segment_Timeout No APDU_Timeout Yes Number_Of_APDU_Retries Yes List_Of_Session_Keys No Time_Sync_Recipients No Max_Master Yes W Max_Info_Frames Yes W Device_Address_Binding Yes Database_Revision Yes Configuration_Files
BACnet Protocol Implementation Conformance Statement Loop Object Type This object type will not be supported in this project. Multistate Input Object Type This object type will not be supported in this project. Multistate Output Object Type This object type will not be supported in this project. Multistate Value Object Type This object type will not be supported in this project. Notification Class Object Type This object type will not be supported in this project.
