Installation Instructions

Document No. 550-981
Installation Instructions
March 12, 2009
Siemens Building Technologies, Inc. Page 3 of 5
5. Mount backplate to electrical box.
Figure 8. Mounting Back plate to electrical box.
6. Set address using DIP Switches. Binary 0 to
255 from positions 1 through 8.
Example 1: Switch 1 and 2 ON = Address 3.
Example 2: Switch 1 and 4 ON = Address 9.
Figure 9. DIP Switches (showing address 3.
7. Restore power.
8. Verify power, TX/RX LED is ON solid.
9. Snap front cover on.
Figure 10. Installing Front cover to back plate.
Table 1. Logical Point Descriptions.
Logical Point #
Description (on board)
1
DI 1
2
DI 2
3
DI 3
4
DI 4
5
DO 1
6
DO 2
7
AI 1
Figure 11. PPM on 4x4 inch Electrical Box.
10. Record logical point assignments on label.
The installation is now complete.