Installation Instructions

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Powers is a trademark of Siemens Industry, Inc. Product or company names mentioned herein may be the
trademarks of their respective owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
Document No. 129-389
Printed in the U.S.A.
Page 2 of 2
Figure 2. Damper or Inlet Vane Installation
(See Table 1).
Table 1.
Item
Description
Quantity
1
No. 6 Actuator
2
2
Pivot Shaft
1
3
Angle Iron Frame
2
4
"E" Ring
4
5
Stabilizing Plate
1
6
Cap Screw 5/16 - 18 Thread
4
7
Positioning Relay
1
8
Mounting Bracket
1
9
Feedback Spring
1
10
Adjustment Screw
1
11
Nut 10 - 24 Thread
1
12
Adjustment Nut
1
13
Spring Arm
1
14
Nut 3/8 - 24 Thread
4
15
Clevis
2
16
Cotter Pin
4
17
Clevis Pin
2
18
Load Bar
1
19
Clevis Pin
2
20
Clevis
2
21
Adapter
2