Installation Instructions

Document No. 129-173
Installation Instructions
Rev. 2, August, 2000
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Flowrite is a trademark of Siemens Industry,
Inc. © 2000 Siemens Iindustry, Inc.
Siemens Industry, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have
comments about this document, please send
them to [e-mail]
Document No. 129-173
Printed in the U.S.A.
Page 3 of 3
Installation, Continued
12. Place the calibration label on the cover as
shown in Figure 3. Mark for reference. (Optional)
Attach the relay cover if you are not calibrating
immediately.
13. Calibrate the relay by following the instructions
included with the positioning relay.
The installation is now complete.
References
Technical Instructions
RL 147-2
155-038P25
Installation Instructions
RL 147 Positioning Relay Calibration
129-125
Discontinued