Data Sheet for Product

Page 9 Siemens Industry, Inc.
Used with Pneumatic Actuator Models
Photo Description
No. 3 No. 4 No. 6
No. 6
Tandem
Large
Capacity
LC
Quantity Part Number
Positioning Relay Actuator Mounting Kit
For No. 3 pneumatic damper actuator. Can also
be factory-assembled to extended shaft mounted
actuators. If using cast iron crank, it must be
replaced with a 331-941 crank manufactured
after Jan 1993.
(see technical instructions #155-038P25, and #155-146P25)
(see installation instruction #129-167)
●
1
147-104
Positioning Relay Actuator Mounting Kit
For No. 4 pneumatic damper actuator.
(see technical instructions #155-032P25, and #155-038P25)
(see installation instruction #129-168)
●
1
147-314
Positioning Relay Actuator Mounting Kit
For No. 6 pneumatic damper actuator.
(see technical instructions #155-277, #155-029P25, and
#155-038P25)
(see installation instruction #129-169)
●
1
147-276
Actuator Service and Repair Accessories
No. 4 Cast Aluminum Housing, Standard
Legacy actuators with part numbers lower than or
equal to 331-2885
●
Package of
5 units
333-072
No. 4 Diaphragm for High Ambient Temp.
For newer models with part numbers 331-2888
and higher (Up to 400°F diaphragm)
●
Package of
5 units
333-071
No. 6 Standard Replacement Diaphragm
(see technical instructions #155-032P25)
(see installation instruction #129-089)
● ●
Package of
5 units
333-572