Data Sheet for Product

Page 3 Siemens Industry, Inc.
Used with Pneumatic Actuator Models
Photo Description
No. 3 No. 4 No. 6
No. 6
Tandem
Large
Capacity
LC
Quantity Part Number
Linkage Kit
4 inch (102 mm) rod, ball joint and crank.
For 3/8 inch (10 mm) to 1/2 inch (13 mm)
diameter damper shafts.
(see technical instructions #155-032P25 and #155-146P25)
● ● ● ●
1
331-947
Ball Joint Connector
For use with No. 3 actuator
3/8-24 thread ball joint
5/16 inch rod receiver
(see technical instruction #155-032P25)
● ●
331-656
Pivot Post Kit
For use with No. 3 actuator
1/4-28 x 7/16 inch bolt and nut
5/16 inch rod receiver
(see technical instruction #155-032P25)
●
1
331-657
Ball Joint Connector Linkage Kit
For Trane and Nesbitt units
• 3/8-24 ball joint connector
• 1/4-20 ball joint connector
• 8 inch (202 mm) long, 5/16 inch push rod
• Bracket, lockwashers, nuts
● ●
1
331-671
Clevis and Components for Frame Mounting
● ● ●
• Forged Steel Clevis, 2 inches long (A)
1
331-653
• 5/8” Square Steel Clevis, 2.6” long (B)
1
333-207
• Clevis Pin, 1-5/32 inch long (C)
1
331-293
• Hitch Pin Clip (D)
(see technical instructions #155-032P25 and #155-146P25)
1
331-807