User Manual

Operation
Standby page
8
26 | 29
Siemens Industry, Inc.
A6V10958126_en
--
_a
Building Technologies
2017
-
06
-
30
If the alarm notification is acknowledged to be ok by the controller before you
acknowledge it, then the icon becomes . In this case, you must acknowledge it
on the device by performing the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the alarm notification.
8.7 Standby page
When no operation occurs on the screen for some time, the room operator units
turns off backlight and displays the standby page automatically.
You can press any button to return to the previous page.