User Manual

Operation
Expert mode
8
25 |
29
Siemens Industry, Inc.
A6V10958126_en
--
_a
Building Technologies
2017
-
06
-
30
If the icon keeps displaying as , you can manually acknowledge it by performing
the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the service notification. If the service
notification is OK, then the icon disappears on the screen. If the icon
appears on the screen, then the service notification is acknowledged.
If the service notification is acknowledged by the controller before you
acknowledge it, then the icon becomes . In this case, you must acknowledge it
on the device by performing the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the Expert page.
2. Press Button 6 to acknowledge the service notification.
8.6.2 Alarm notification
When there is an alarm notification, appears on the screen and the screen
displays as below:
Before the alarm notification is acknowledged by the controller, there is no other
operation available except acknowledging the notification as follows:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the notification. If the alarm notification is OK,
then the icon disappears on the screen. If icon appears on the screen, then it
means the alarm notification is acknowledged.