User Manual

6
Siemens
A6V11946236_en--_a
Smart Infrastructure
2020-1-16
DIP Switch configuration of Extension Module
4
12
20
28
5
13
21
29
6
14
22
30
7
15
23
31
8
16
24
NOTICE
The same address of extension module must be set respectively in the application program
of the controller. 0 cannot be set as the slave address.
Notes
Engineering notes
NOTICE
To ensure protection against accidental contact with relay connections carrying voltages
above 42 V
eff
, the extension module must be installed in an enclosure (preferably a control
panel). It must be impossible to open the enclosure without the aid of a key or tool.
AC 230 V cables must be double-insulated against safety extra low-voltage (SELV) cables
Disposal
The device is considered an electronics device for disposal in terms of European
Directive 2012/19/EU and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.