Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationBACnet Certificate Climatix ComExtension POL904_POL908 (FW=11.04)

CB1Q3933en Building Technologies

2017

Climatix™

Communication module BACnet IP

POL908.00/xxx

Communication module to connect a Climatix POL6xx.xx controller to a BACnet IP

network

● Integration into a building automation and control system via BACnet IP

● Client communication to other BACnet devices

● The module must be connected to the left side of a POL6xx.xx controller

● Preloaded generic BACnet server

● Supports BACnet/IP (B-BC profile and BBMD)

● Network parameters configurable via controller, HMI or SCOPE tool

● The POL908.00/xxx communication module is part of the Climatix product range.

Refer also to Data sheet Q3900, Mounting instructions M3910 and BACnet PICS

document P3939en

Summary of content (6 pages)

PAGE 1
Climatix™ Communication module BACnet IP POL908.00/xxx Communication module to connect a Climatix POL6xx.xx controller to a BACnet IP network ● ● ● ● ● ● ● CB1Q3933en 2017-06-12 Integration into a building automation and control system via BACnet IP Client communication to other BACnet devices The module must be connected to the left side of a POL6xx.
PAGE 2
Technology BACnet / IP protocol BACnet, an ASHRAE building automation and control networking protocol, was designed specifically to meet the communication needs of building automation and control systems for applications such as heating, ventilation, and air conditioning control, lighting control, access control, and fire detection systems and their associated equipment.
PAGE 3
Technical data General Data Dimensions (w x h x d) 45 x 110 x 75 mm Materials and Colors ● Base: Plastic, pigeon-blue RAL 5014 ● Housing: Plastic, light-grey RAL 7035 Weight excl. packaging 97g Power supply Power supply Via system interface from controller DC 5 V (± 5 %), max. 270 mA Interface BACnet IP Type Ethernet 10/100 Mbit (IEEE 802.
PAGE 4
Functions LEDs "BSP" and "BUS" for diagnostics LED Color Flashing frequency Meaning/Mode BSP Red/Green 1 s red / 1 s green BSP upgrade mode Orange Flashing at 1 Hz BSP upgrade failed, bad image Orange/Green 1 s orange / 1 s green BSP upgrade partial done, wait for continue Green Steady "on" BSP operating and communication with controller working Orange Steady "on" BSP operating but no communication with controller Red Flashing at 2 Hz BSP error (Software error) Red Steady "on" Hardw
PAGE 5
Notes Security: National safety regulations CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage ● Observe national provisions and comply with the appropriate safety regulations.
PAGE 6
110 116 3933M01 Dimensions POL908.00/xxx 45 -40 T 70 IP20 5 V DC 270 mA E93189 75 27,5 3933M02 45 080307A123456 Used with POL6xx 47,5 MAC-address (hex): 00-00-FF-12-34-AF 110 116 Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41-724 24 24 www.siemens.