Data Sheet for Product

9 / 16
Siemens Room units with 2-wire interface CB2N3261en_03
2020-01-22
5. After the confirmation of weekdays, pressing Plus or Minus again will jump to
the following view.
The first line is number of operation; the second line is time setting, the invalid
time "--:--" is used to add a switch.
6. Press button Plus and Minus to set up time point and select an operation, and
press OK to confirm the input. In any parts of time area, press OK when the
cursor is located on "--" without a number is selected, the switch will be
deleted, and HMI-SG will go back to viewing switch.
7. In scheduler setting, pressing PROG button will go back to the previous page.
User can press this button to exit the setting step by step.
HMI-SG will also exit time scheduler setting automatically if no operation was
performed for 1 minute, and all changes made after pressing OK button will
not be saved.