Data Sheet for Product

7 / 16
Siemens Room units with 2-wire interface CB2N3261en_03
2020-01-22
3. After the number of minute is confirmed, the whole time area will blink.
Pressing button Plus or Minus will switch time format between 12-hour with
AM/PM and 24-hour. The view is showed as follows in 24-hour time format:
4. After the time format is confirmed, HMI-SG will jump to the view of year.
The view is showed as follows:
5. After the year is confirmed, it will jump to the view of month and day.
The view is showed as follows:
6. After the month and day is confirmed, HMI-SG will return to the view of time.
Press button PROG or there is no any operation for 1 minute, it will exit the
setting.
There is no real clock in HMI-SG. Controller sends the exact time periodically to
HMI-SG for synchronization.
Note