User Manual

Siemens Smart Infrastructure A5W90004543 B A6V11276164_----_b 2019-06-04 1 / 2

Mounting instructions

Climatix

range

POL461.45/STD

安装指南

Climatix

系列

Clearance requirement / 间隙要求

Dimensions in mm / 尺寸（毫米）

Mounting / 安装



Five screws (GB818-M3.5×8) and five washers (Ø4)

5 个螺钉 (GB818-M3.5×8) 和 5 个垫圈 (Ø4)

②

Five standoffs M3.5×L (L>10 mm)

5 个螺柱 M3.5×L (L>10 mm)

Note: The mounting screws, insulation washers and standoffs are not included in the delivery package.

注意：包装中不包含安装螺钉、绝缘垫圈和螺柱。

A5W90004543

PAGE 1
A5W90004543 en Mounting instructions ClimatixTM range zh 安装指南 ClimatixTM 系列 POL461.45/STD Clearance requirement / 间隙要求 Dimensions in mm / 尺寸（毫米） Mounting / 安装 en zh  Five screws (GB818-M3.5×8) and five washers (Ø4) 5 个螺钉 (GB818-M3.5×8) 和 5 个垫圈 (Ø4) ② Five standoffs M3.5×L (L>10 mm) 5 个螺柱 M3.5×L (L>10 mm) Note: The mounting screws, insulation washers and standoffs are not included in the delivery package.
PAGE 2
WARNING / 警告 The controller must be mounted with insulation washers. 控制器安装时必须带上绝缘垫圈。 Accidental fall out of metallic screws might cause short circuit. 金属螺钉脱落可能会引起短路。 Dimensions (mm) / 尺寸（毫米） Example of connectors / 端子示例 It is highly recommended that, the Climatix POL461.45/STD controllers use connectors supplied by Phoenix. The permissible connectors are listed below and can be obtained from Phoenix (http://www.phoenixcontact.com/). 强烈建议 Climatix POL461.