User Manual

About this document
Important safety notes
2
A6V1127616_en--_a 5 | 38
We assume that persons using our products and documents are authorized and
properly trained and have the requisite technical knowledge to use our products as
intended.
Additional information on products and applications is available:
● On the intranet (for Siemens employees only) at
https://workspace.sbt.siemens.com/content/00001123/default.aspx
● At your next Siemens branch office www.siemens.com/sbt or at your system
suppliers.
● From the support team in the headquarters fieldsupport-
[e-mail] if no local point of contact is available.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
2.4 Important safety notes
Field of use
The Climatix controllers provide control and monitoring functions for ventilation, air
conditioning and refrigeration as well as district heating and biomass boiler
equipment.
Correct use
The prerequisites for safe, trouble-free operation of the products mentioned above
are correct transport, storage, installation and commissioning, as well as careful
operation.
Electrical installation
Fuses, switches, wiring and grounding must comply with local safety regulations for
electrical installations.
Wiring
AC 115/230 V mains voltage must be strictly segregated from AC/DC 24 safety
extra-low voltage (SELV) when wiring the system to protect against electric shock
hazard.
Commissioning
The Climatix products are designed for use and commissioning by qualified
personnel with appropriate training.
Maintenance
The Climatix controllers are maintenance free apart from changing the backup
battery for the Real Time Clock. The controllers must be protected from dust and
humidity. During service visits, the controllers (PCB) must not be accessed by
service personnel due to electrostatic shock.
Faults
Only authorized personnel are permitted to perform diagnostics, to correct faults
and restart the equipment. This also applies to work carried out on the control
panel (e.g. safety checks or replacing fuses).
Storage and transport
Always observe the limits for storage and transport specified in the relevant Data
Sheets.
If there are any questions, please contact your supplier.