User Manual

Programming and commissioning
USB stick
5
A6V1127616_en--_a 29 | 38
Supported USB stick list
USB sticks with FAT32 or FAT file systems are compatible with C400 controllers.
Below are recommended USB sticks.
Brand Type
Kingston 16G DTSE9H USB2.0
SONY 16G USB2.0
Aigo 16G L8202 USB2.0
TOSHIBA 16G USB2.0
Teclast 16G USB2.0
Kodak 16G K133 USB3.0
SanDisk CZ73 16G USB3.0
SanDisk CZ50 16G USB2.0
SanDisk CZ48 16G USB3.0
SanDisk CZ600 16G USB3.0
SanDisk CZ3 16G USB2.0
Download BSP and applications with USB stick
Refer to SAPRO online help > BSP upgrade on how to update the controller with
an USB stick instead of an SD card is used.
When downloading with an USB stick, a service PIN is required to active the
download process. Once the controller is powered off, plug in the USB stick, press
the PIN then power on the controller. After a short while, the LED flashes red and
green.
Only files in xxxComp.UCF format are supported for download with USB stick,
whereas all files stored in the stick are loaded to the controller.
Save or restore parameters with USB stick
This operation can only be performed with object aoDiagnostic in SCOPE or HMI,
or mapping the object to Modbus communication.