User Manual

Programming and commissioning
USB stick
5
28 | 38 A6V1127616_en--_a
Normal operation
Controller status LED status
Power off Off
Power on, application loaded and running
Flash red for very short time, then flash green until
permanent green*)
Power on, application loaded but not running, or
UUID function enabled
Solid orange
Power on, application not loaded Flashing orange
*) The duration for flashing green depends on application size.
Upgrade mode
Controller status LED status
Downloading an application/parameter Flashing red/green
Downloading an application/parameter finished*) Solid orange
Downloading BSP Flashing red/green
Downloading BSP finished Stop flashing red/green
*) Manually start the controller or power-down and power-up the controller after
downloading is finished.
Error diagnostic
Controller status LED status
Application or firmware error*) Flashing red
Firmware or hardware error Solid red
Power failure or hardware error Off
*) If an approved or verified application or BSP is reloaded and the LED is still
flashing red indicates a firmware error.
Refer to
Climatix SCOPE online help
for detailed information.
5.4 USB stick
The USB stick is used to download BSP and application, as well as saving
application parameters.
Operation
WARNING
Do not plug in or out the USB stick when the controller is powered on.
This may result in unexpected damage or abnormal mode.