User Manual

Programming and
commissioning
Diagnostics status
5
A6V1127616_en--_a 27 | 38
● Controller parameters can be uploaded to a Scope project, and downloaded to
another controller.
● The parameters can be saved to a USB stick and be loaded again, and can be
executed in an aoDiagnostic object in Scope.
● Reset the controller to activate some configurations (for example the IO
configuration) after parameters are loaded to the controller.
5.3 Diagnostics status
C400 controllers have one bi-color LED to indicate the BSP (board support
package) status. Refer to data sheet for details.