User Manual

ManualsBrandsSiemens ManualsBuilding automationCE-Declaration PLD9.Tower/-.Rack

CM2N8576en

17.07.2006

Building Technologies

Building Automation

576

PLD9.TOWER PLD9.RACK

VISONIK

DCS Data and

communication server

PLD9.TOWER

PLD9.RACK

Data and communication servers (DCS) are used as management stations in

building automation and control (BAC). With DDC technology, the DCSs, as

superposed system components, allow for customer-specific solutions of all

building automation and control tasks.

Use

The DCS' application range comprises a large number of building automation and control

tasks such as:

• Process station communication at the subsystem level.

• Processing of acquired process data in real time.

• Continuous storage of selected process values (temperatures, setpoints, etc.).

• Monitoring of technical installations.

• Output of higher commands (e.g. peak load control, emergency power and network

restoration).

• Logging of plant faults.

• Alarming of internal and external service organizations.

• Sending clear text messages based on technical plant events.

• Triggering reactions based on various causes:

Time, date, process value changes and operating hours (maintenance).

• Simultaneous execution of various BAC tasks (multitasking).

• Presentation of process values, consumption variables, efficiency degrees and further

operational and technical system information in transparent displays.

• Operation of system-wide BAC functions via graphical user interfaces.

Summary of content (6 pages)

PAGE 1
8 PLD9.TOWER 576 PLD9.RACK VISONIK® DCS Data and communication server PLD9.TOWER PLD9.RACK Data and communication servers (DCS) are used as management stations in building automation and control (BAC). With DDC technology, the DCSs, as superposed system components, allow for customer-specific solutions of all building automation and control tasks. Use The DCS' application range comprises a large number of building automation and control tasks such as: • • • • • • • • • • • • CM2N8576en 17.07.
PAGE 2
• Connection of linked and third-party systems. • Operation of building automation and control systems via networks. Type summary The PLD9-series of the DCS data and communication server consists of two housing types with scalable software licenses and hardware options. Tower housing: PLD9.TOWER Option 1: Option 4: Option 6: 19” rack housing: PLD9.
PAGE 3
Basic hardware The data and communication server is delivered with the following hardware components: We reserve the right to make changes to the basic hardware configuration. Required number of computer types PLD9.... Tower Rack Housing (tower or 19” rack). Mouse CPU hard drive supporting - 1 mouse (PS/2) - 1 keyboard (PS/2) - 1 LAN, 1x RJ45 - 2 COM port V.
PAGE 4
Options The following software and hardware components can be installed in addition to the basic installation. We reserve the right to make changes to the basic hardware configuration. Possible number of computer types PLD9.... Tower Rack Order number – – – – PCI- graphics card, 128 MB, for higher performance PCI analog modem PCI ISDN modem PCI audio card 1 1 1 1 1 1 1 1 PLD9.G128/E ALD9.ANALOG ALD9.ISDN ALD9.
PAGE 5
Computer performance characteristics Below is a list of performance features not readily apparent from the list of components and accessories above. Furthermore, a few important VISONIK system variables are listed. Options are printed in parentheses. Computer types PLD9...
PAGE 6
Technical data If not mentioned specifically, the following information applies to all computer types. Mains supply PLD9.TOWER and PLD9.RACK 100 V – 240 V Mains frequency 50/60 Hz Max. rated current: PLD9.TOWER and PLD9.RACK 100 V – 240 V / 6 A – 3 A Active power 274 W H x W x D in mm, no plug PLD9.TOWER PLD9.RACK 444 x 205 x 605 5 height units (U) PLD9.RACK (installation depth). 560 mm (without plug) Weight PLD9.TOWER and PLD9.RACK ca. 28 kg (depending on configuration).