User Manual

ManualsBrandsSiemens ManualsBuilding automationDCS data and communication server PLD7.Tower, PLD7.Rack

559

PLD7.Tower PLD7.Rack

VISONIK

DCS data and

communication server

PLD7.Tower

PLD7.Rack

8559P02

8559P01

Data and communication servers (DCS) are used as management stations in

building automation and control (BACS). Being a higher system component, the

DCS together with DDC technology allow for customized solutions covering all

tasks to be carried out in building automation and control.

Use

The DCS field of use includes a large number of building automation and control tasks

and functions such as:

• Communicating with process stations on the subsystem level.

• Real-time processing of recorded/acquired data.

• Continuous storage of selected process values (temperatures, set points, etc.).

• Monitoring of technical installations.

• Output of higher commands (e.g. peak load limiting and network restoration).

• Reporting plant faults.

• Alarming for internal or external service organizations.

• Sending clear text messages based on plant events.

• Triggering reactions based on different causes:

Time, date, and process value changes and operating hours (maintenance).

• Simultaneously executing multiple BAC tasks (multitasking).

• Presenting process values, consumption variables, degrees of efficiency, and further

operational or system-related information by means of clear displays.

CM2N8559en

21.10.2002

Siemens Building Technologies

Building Automation

Summary of content (6 pages)

PAGE 1
PLD7.Tower 8559P02 8559P01 8 559 PLD7.Rack VISONIK® DCS data and communication server PLD7.Tower PLD7.Rack Data and communication servers (DCS) are used as management stations in building automation and control (BACS). Being a higher system component, the DCS together with DDC technology allow for customized solutions covering all tasks to be carried out in building automation and control.
PAGE 2
• Operating system-wide BAC functions via a fully graphical operator interface. • Connecting linked and third party systems. • Operating building automation and control systems via networks. Type summary The PLD7 series of DCS data and communication servers comes in two hardware types featuring scaleable software licenses through selectable options. Tower housing: 19” rack housing: PLD7.TOWER PLD7.
PAGE 3
Basic hardware equipment The following hardware components are preinstalled on the DCS on delivery: We reserve the right to change the basic PC hardware equipment. Required number of PLD7… computer types Tower and Rack Order no. Basic PC Caution: The computers are delivered without keyboard and monitor! – – Housing (tower or 19” rack) Mouse CPU main board supports AGP graphic bus, PCI bus - 1 mouse (PS/2) - 1 keyboard (PS/2) - 1 LAN network, fast IDE controller - 2 COM interfaces V.
PAGE 4
Options The following software programs and hardware components can be installed in addition to the basic equipment. We reserve the right to change the optional PC hardware equipment. Possible Order no. Number – VISONIK INSIGHT on PLD 1 PPV08.010 ... 200 – PC-G AGP graphic card, 64 MB, 1024x768 pixels for sophisticated requirements Uninterrupted power supply (UPS) A1000 1kVA 1 ALD7.G1600/64 1 ALD7.USV 1 ALD7.S6/KIT LVR1.4401-E 6 LVR2.4321 6 6 LVR1.4401-E LVR1.4402-E 4 ALD7.TS4 2 ALD7.
PAGE 5
Computer performance features Below is a list of performance features not visible from the above list of components and accessories. Furthermore, the list contains a few important VISONIK system variables. Options are provided in brackets. PLD7 computers Tower and Rack Basic features: – – – Yes Yes Yes Upgrade ability to bigger PLDs and options Watchdog RAID1 or 5 (redundant array of independent disks) Interfaces: – – – Parallel interfaces USB ports external Serial ports - Terminal server 4 x V.
PAGE 6
Technical data If not mentioned otherwise, the following data apply to all computer types. Power supply Mains voltage PLD7.tower and rack Fusing PLD7.tower and rack Mains frequency: Power consumption: PLD7.tower and rack 230 V / 110 V (200 – 240 / 100 – 127) 10 A 50/60 Hz . . 3.5 A / 7 A++ max. 275 W H x W x D in cm, no plug PLD7.tower PLD7.rack 444 x 205 x 605 5 units (U) PLD7.rack (installation depth) 560 (no plug) PLD7.tower and rack 21 kg 1 hot plug disk 710 Gr.