User Manual

ManualsBrandsSiemens ManualsBuilding automationDCS data and communication server PLD7.Tower, PLD7.Rack

CM2N8558en

17.11.2000

Siemens Building Technologies

Landis & Staefa Division

PLD6.010...200 PLD6.../Rack

VISONIK

DCS Data and

Communication Server

PLD6...

Data and Communication Servers (DCS) are used as central stations in building

automation and control systems (BACS). The DCSs represent superposed

system components that, by applying DDC technique, enable customer-specific

solutions of all building automation and control tasks.

Use

A DCS's scope of application comprises a multitude of tasks and functions in building

automation and control systems such as:

• Communication with process stations on the subsystem level

• Real-time processing of acquired process data

• Continuous storage of selected process values (temperatures, setpoints, etc.)

• Monitoring of technical equipment

• Issuing of higher commands (e.g., peak demand limiting program, backup power and

power restoration)

• Reporting of plant faults

• Issuing alarms for internal or external service organisations

• Issuing distinct clear text messages based on plant events

• Reactions triggered by different causes:

Time, date, process value changes, and hours of operation (maintenance)

• Simultaneous execution of multiple BACS tasks (multitasking)

8558P02

8558P01

Summary of content (6 pages)

PAGE 1
558 PLD6.010...200 8558P02 8558P01 8 PLD6.../Rack VISONIK® DCS Data and Communication Server PLD6... Data and Communication Servers (DCS) are used as central stations in building automation and control systems (BACS). The DCSs represent superposed system components that, by applying DDC technique, enable customer-specific solutions of all building automation and control tasks.
PAGE 2
• Clear presentation of process values, consumption volumes, efficiency as well as other operational and system information • Operation of system-wide BACS functions via full-graphics MMIs • Connection of link and third-party systems • Operation of building automation and control systems via networks Type summary The PLD6 series of the DCS Data and Communication Server comes in several types: L&S tower housing: L&S 19” rack housing PLD6.005 PLD6.005/Rack DCS for 5 subsystems PLD6.010 PLD6.
PAGE 3
Basichardware The following hardware components are pre-installed upon delivery of the Data and Communication Server: We reserve the right to make changes to computer configurations. Required number for the PLD6.... 005 010 025 050 100 200 Order number 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ----ALD6.MB568 1 1 ALD6.
PAGE 4
Options The following software and hardware components can be installed in addition to the basic equipment. We reserve the right to make changes to optional PC hardware components. Possible number for the PLD6… – – – – VISONIK INSIGHT on PLD 128 MB add. Memory Creative Labs PCI 128 bit sound card Uninterruptible power supply (UPS) APC SU-700 005 1 1 1 010 025 050 1 1 1 1 1 1 1 1 100 1 200 1 Order number PPV08.010 ... 050 ALD6.MEM128 ALD6.SB128 ALD6.USV . . .
PAGE 5
Performance of the computer types The table below provides an overview of computer performance that cannot directly be derived from the above summary of components and accessories. Additionally, the table contains some very important VISONIK system values. Options are contained in parentheses. Computer type PLD6....
PAGE 6
Technical data If not mentioned specifically, the following technical data are valid for all computer types. Power supply Voltage: PLD6.005 ... 200 10 A Frequency: 50Hz / 60 Hz Power supply: PLD5.005 ... 200 Dimensions Siemens Building Technologies Landis & Staefa Division . . 3.5 A / 7 A max. 275 W H x W x D in cm, without plug PLD5.010 ... 200 PLD5.005 ... 200/Rack 56 x 18 (Socket 28) x 45 16.5 x 44 x 43 (without front panel) Weight PLD5.005 ...