Specifications

Industrial PC
SIMATIC Rack PC
SIMATIC Rack PC 547B
3/8
Siemens ST PC · November 2008
3
■ Design
Basic design
• All-metal 19" casing (4 HU) for high electromagnetic compati-
bility and mechanical ruggedness; externally painted, pre-
pared for mounting on telescopic rails
• Horizontal and vertical installation is possible, can be used as
an industrial tower PC by using the appropriate kit.
• Lockable front flap for authorized access to front swap media,
operator controls (Reset, Power), USB interface, front fan and
dust filter
• Card retainer for PC modules for safe transport (vibration and
shock)
• Replacement of PC components (e.g. PC cards or HDD) with
a single tool
• Replacement of dust filter without tools
• Dust protection by means of overpressure ventilation using
bearing-seated front fan via filter
• 6 slots for installing drives
- On the front: 1 x 3.5"; 3 x 5.25"
- Internal: 2 x 3.5"
• Graphics on-board on the PCI-Express bus, Intel GMA950
integrated in chip set, up to 2048 x 1536 pixels, 75 Hz, 16 bit
colors
• Interfaces:
- 1 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45)
- 4 x USB 2.0 at the rear, 2 x USB 2.0 at the front
- 2 x PS/2, 1 x COM1, 1 x LPT, 1 x VGA
- Audio: Line In/Out, Mic
• 7 spare slots for expansions (all long):
- 4 x PCI
- 1 x PCI-Express x16
- 2 x PCI-Express x1
• Power supply: 110 - 230 V AC, 50/60 Hz
For design variations of the SIMATIC PC see "ordering data".
A Tower Kit can be ordered as an accessory for converting the
computer into an Industrial Tower PC.
See
"Ordering data for accessories"
Status-, alarm indicator:
Operating mode
Hard disk access
Fan-, temperature status
3.5“ FDD
2 x USB 2.0
Housing with
anti-corrosion coating
COM1 VGA
LPT1
Fan with
speed
monitor
COM2:
Serial interface 2 (optional)
2 x DVI-D or 2 x VGA
(optional):
via PCIe x16 graphics card
AC-Power
supply
Audio
Power switch
Opt. drive
1 x Gigabit-Ethernet
2 x USB 2.0
Keyboard, mouse
2 x USB 2.0
Expansion slots:
4 x PCI, 2 x PCI Express x1,
1 x PCI Express x16
SATA hard disk swap frame,
hot swap with RAID1 configuration
(removable during operation)
Front door
lock
SIMATIC Rack PC 547B: Connections and Expansions
© Siemens AG 2009