Operating instructions

Operation and configuration
9.2 Additional drivers and applications
SIMATIC Panel PC 677B
Operating Instructions, 05/2007, A5E01035609-01
71
The calibration mask is output on the selected display.
6. Touch the blue arrow.
The input is confirmed by a tick, and the next arrow is displayed.
7. Confirm all input prompts (arrows, or crosses in the center) until the complete screen has
been calibrated.
Note
If the touch screen does not react as expected when touched, repeat the calibration.
Only an active screen can be calibrated. An active screen is displayed in black, and a
deactivated screen in red.
9.2.2 Activate touch functionality
Procedure
1. Select "Start > Programs > UPDD > Settings".
The "UPDD Console" dialog box opens.



Figure 9-2 Activate touch functionality
2. Select the corresponding screen ①.
3. Set a tick in the "Enabled" ③ option box in the "Properties" ② tab.
The screen is activated.