Operating instructions

Commissioning
8.4 Additional applications
SIMATIC Panel PC 677B
64 Operating Instructions, 05/2007, A5E01035609-01
Solution:
Before performing a RAID commissioning, the SIMATIC PC DiagMonitor should be
deactivated. Subsequently, it can be reactivated.
Measures:
If the DiagMonitor Management Station is in operation on your device:
● Close all applications, also the Management Station.
● Afterwards, stop the DiagMonitor SNMP Agent (SOL-Agent). In order to do so, select
Start > Run and enter cmd in the field.
● Afterwards, enter Net stop snmp and confirm with the Enter key.
If your device is remotely monitored with SIMATIC PC DiagMonitor:
In this case you need only stop the DiagMonitor SNMP Agent (SOL-Agent).
● In order to do so, select Start > Run and enter cmd in the field.
● Afterwards, enter Net stop snmp and confirm with the Enter key.
Notice
If you do not adhere to the procedure described above, a correct RAID configuration
cannot be guaranteed.